The Netgear Nighthawk router is among the most popular line of routers. This router is known for its incredible functionality, features, and design. You can ensure a high-speed internet connection and flawless network coverage. Moreover, you can also enable the Netgear Nighthawk bridge mode and extend the range. You can easily enable the bridge mode through the web interface.
The bridge mode is helpful in various situations. If you have a huge house and you’re not receiving proper coverage. So, you can use this router with another router with the help of the bridge mode. You can connect different networking devices using the bridge mode. Moreover, you can experience seamless roaming with the help of bridge mode.
If you want to know the proper procedure to enable Nighthawk bridge mode, we’ve got you. We are here with this post to help users enable bridge mode on Nighthawk router. This post will guide you through the complete procedure. We will also discuss some issues you could face with enabling bridge mode on your router.
What Are the Requirements to Enable Nighthawk Bridge Mode?
Before we discuss the procedure to enable Nighthawk router bridge mode, we will explain the necessities. There are some things you must have to set up the bridge mode correctly. You require the following things:
Before we discuss the procedure to enable Nighthawk router bridge mode, we will explain the necessities. There are some things you must have to set up the bridge mode correctly. You require the following things:
These are the requirements you must have to enable the bridge mode on the router. Further, we will explain the complete procedure.
How to Enable Bridge Mode on Nighthawk Router?
Now that you know the requirements to enable bridge mode, you can do so easily. You can enable the bridge mode easily by logging into the router’s web interface. Ensure to note the wireless settings of the router, to which this router will connect. To enable the bridge mode, follow the below steps:
- To begin with, connect your device to the router’s network.
- Open a web browser and enter the IP address in the address bar.
- Now, on the login page, enter the default login credentials in the field.
- The web interface of the router should appear on the screen.
- Hereon, from the interface, go to Advanced, and then to Advanced Setup.
- From this section, go to the Wireless Bridge section and select Enable Bridge Mode.
- After that, click Setup Bridge Mode and enter the settings you noted previously.
- This page will show the details you added and the settings you changed.
- At last, click Apply to save the changes and settings you made.
These are the steps to enable bridge mode on Nighthawk router. Now, you can connect the Nighthawk router to the other router using an Ethernet cable and secure the connection. Afterward, you can use the Nighthawk router accurately. If you want to know how to turn off the bridge mode, keep reading ahead.
How to Turn Off Bridge Mode on Netgear Nighthawk Router?
If you want to know the procedure to turn off the Nighthawk router, you can do so easily. You just need to log into the router’s web interface. From the web interface, you can turn it off simply. The steps for turning off the bridge mode are as follows:
- Initially, open a web browser and log into your router’s web interface.
- Now, from the web interface, go to the Advanced page.
- Hereon, from this page, go to the Advanced Setup section.
- From this section, go to the Wireless Bridge segment.
- After that, just uncheck the Enable Bridge Mode box.
- The bridge mode should be off now.
- Finally, save the changes you made to the settings.
These are the steps to turn off the Nighthawk bridge mode. Once the bridge mode is off, the router will start working normally. However, if you are having trouble enabling the bridge mode, further, we will discuss the troubleshooting methods.
How to Fix the Bridge Mode Not Working Issue?
Sometimes due to various reasons, you could face an issue with the bridge mode. But you don’t have to worry about it, as you can easily fix it. You can try the following methods to resolve the Netgear Nighthawk bridge mode issues:
Check the Configuration
There could be an issue with the configuration of the router. Ensure you have entered the correct details of the other router. If you give the incorrect details, the router might not be able to connect correctly. Ensure to disable the DHCP settings of the router as well.
Router Compatibility
There could be a compatibility issue with the routers as well. If one router is incompatible with the router, they won’t form a connection. Thus, you need to check if the routers are compatible with each other. If it isn’t, you can try connecting the router to another router.
Check for Any Firewalls
If there’s any firewall enabled on either device, that can also cause an issue. The firewall will prevent the routers from forming a connection. Thus, ensure to disable the firewall before you connect the devices to each other. Now try to enable bridge mode on Nighthawk router again.
Update the Firmware
The outdated firmware of either router can also cause issues. Therefore, you need to ensure to update the firmware, whenever it’s available. If you leave the firmware outdated, it will deteriorate its performance. You can update the firmware from the web interface of the router.
Conclusion
These are the troubleshooting methods you can use to fix the Netgear Nighthawk router bridge mode issues. We hope you understand the proper procedure to enable bridge mode on the router. Now, you can use the router accordingly. If you require help with anything else, reach out to our technical team.
